Home Products Exit Mould 500ml
Exit Mould 500ml

Exit Mould 500ml

$9.50

| /

Exit Mould 500ml

Directions

1. Pointing trigger away from the face, hold down the safety tab on top of the nozzle.

2. Turn nozzle to "ON" position. Do not squeeze the trigger when it is in "OFF" position as this may cause it to spit when turned ON.

3. Spray from 20-30cm away from targeted area. Leave for 30s for light stains and 10 mins for tough stains.

4. Rinse with water and then wipe off. Repeat steps 2 to 4 if required.

5. When finished, turn nozzle to "OFF" position, until safety tab locks in position.
Suitable For: Bathroom & laundry, tiles, grout and walls, rubber bath mats, fridge door seals, boats, under eaves, concrete patios, most mouldy areas.
Storage Instructions: Store in a cool place out of direct sunlight. Do not place container on surfaces likely to suffer discolouration from spills. Dispose of empty packaging with household rubbish.

Health and Product Warnings

Do not swallow. Vapour maybe harmful. Ensure adequate ventilation when using. May give off dangerous gas if mixed with other products. Wear protective gloves when using. Wear either old clothes, or a protective covering as product can cause discolouration of clothing and textiles. Wash hands after use. NOT TO BE TAKEN.

Corrosive. Strongly alkaline. May produce severe burns. Attacks skin and eyes.
Is this a gift?

You may also like